solton cs 12/600

[QJerry]

schematic anyone?? please

[doctor]

schematic anyone?? please

Here it is:

[surfsound]

Hello doctor,

thank you for offering the schematic. Do you own the other parts too? I`m having trouble in the mixing section and in calibration the amplifier.

Would be great if you could give it online.

Best regards

surfsound

PS: I`m a new member and won`t beg. I`m sure to give my experience in repairing back to the forum.

[doctor]

Hello doctor,

thank you for offering the schematic. Do you own the other parts too? I`m having trouble in the mixing section and in calibration the amplifier.

Would be great if you could give it online.

Best regards

surfsound

PS: I`m a new member and won`t beg. I`m sure to give my experience in repairing back to the forum.

I have these schematics only.

Try to address to Solton Acoustic: < service@solton-acoustic.de >
and request missing schematics.

If you will receive missing schematics, please send them to this thread.

Good luck.

[surfsound]

further repair hints and schematics

Hello together,

as time goes by, I `m able to repair my solton cs12/600 with these schematics.

Failure: Left channel always in protection mode, protection LED always on. No signal out from left channel.

Repair: check the voltage above the Z-Diodes D101/ D201. Should be 15V, if not replace.

Works fine now

--> schematics: There are further schematics on elektrotanya.com, search for solton.

Sry, for posting this not here, it is against their rules, but I think you will find it there.

Best regards

Surfsound