Laney Cub 10 or Cub 12

[dobrota]

Please has anybody schematic ? Thanks

[pecorporation]

Here ya go!

[Jazz P Bass]

WooHoo.
Surface mount components.
Wheee!

[J M Fahey]

Well, that's an old Laney trick yo make your life interesting.

[dobrota]

Thanks ! In extra I was interestnig in type transformers inside. There are from Laney LC/VC15 so i guess after change bias Cube 10 can run at 15W

[J M Fahey]

I would change nothing; specially "to go from 10 to 15W".
I guess the 10 or 12 on the model name refers to speaker size, not power.
Of course I may be wrong on this.

[dobrota]

I would change nothing; specially "to go from 10 to 15W".
I guess the 10 or 12 on the model name refers to speaker size, not power.
Of course I may be wrong on this.

Yes, You're right, it refers to speaker size, but also (from Laney website) :
...the CUB 10 is a Class A/B design and produces 10 watts RMS of power from an output section loaded with a pair of 6v6GT's, driven from a pre amp loaded with 2 ECC83's...

[guitarspaz]

Any chance there's a Cub 12R schematic around ? Like mine alot, but I'd like to experiment to attempt to tighten up the bass in the gain circuit a bit. Make it a tad less vintage sounding. little tighter, etc.

Thanks in advance!

[madtoc]

Here ya go!

hi ,

the link doesn't work,
someone could save me ?
thanks for all.
best regards

[DrGonz78]

Here is the link to the Cub10 & 12 schematics...

Look here for the schematics >>>
LANEY CUB-10 SCH Service Manual free download, schematics, eeprom, repair info for electronics

LANEY CUB-12 2010 SCH Service Manual free download, schematics, eeprom, repair info for electronics

[madtoc]

Here is the link to the Cub10 & 12 schematics...

Look here for the schematics >>>
LANEY CUB-10 SCH Service Manual free download, schematics, eeprom, repair info for electronics

LANEY CUB-12 2010 SCH Service Manual free download, schematics, eeprom, repair info for electronics

Thank you !!
you save me.

[g1]

Re-posting schematic from post #2