Announcement

Collapse
No announcement yet.

Line 6 scems

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Line 6 scems

    Yes ... I know these are impossible to get ...

    BUT--Im not wanting a schematic -- i just need to know the value of ONE cap !

    the amp is a Spider 3 , 150w .

    the cap is on the input jack pcb , its C83 .

    If anyone can tell me the value that would be amazing -- thanks !!

  • #2
    I've been involved with them as a beta-tester on several occasions and I can say with confidence that they are responsive, if nothing else. Send them a note asking about the component in question and I am confident they will get back to you. Maybe not within an hour of sending your note, but they WILL respond. Particularly since your query is clearly of a servicing nature, and not related to any sort of IP theft.

    Comment


    • #3
      Is there a coil before the capacitor?
      Cap to ground?
      If so, and if it is the same as the 15W, then it is 47pf.

      Comment


      • #4
        Originally posted by Jazz P Bass View Post
        Is there a coil before the capacitor?
        Cap to ground?
        If so, and if it is the same as the 15W, then it is 47pf.
        Hi Valvehead,

        Guitar input board (Sider III models 112, 210, 212
        and HD150) contains C83 radial capacitor of 1uF/50V/20%.

        What is the problem?

        Comment

        Working...
        X