Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Looking for "CRATE BX-80" Schematics

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Looking for "CRATE BX-80" Schematics

    I have a crate BX-80 bass amp. I opened it up and 4 caps were blown to the point were I couldn't see the values. So I can't even replace them until I know what they are. If some one has the schematics I would greatly appreciate it

  • #2
    Where are the caps located?
    The power supply?
    Crate usually uses 4700uf caps for the main filter caps.
    And 100uf/35V on the 16 volt rails

    Comment


    • #3
      Please post their label or designation as printed on the PCB component side.
      Juan Manuel Fahey

      Comment


      • #4
        I just called Loud a little over a week ago to have them send me an old amp schematic. I was searching forever for the early 1990's GX-130c schematic and finally called them. They had found the GX-130cxl but not the exact one. However, when I got an email about a few hours later they had sent over the correct schematic. So, I'd give their phone support two thumbs up!!

        Give them a call and see if they can send it to you... All you need is model #, serial #, and your name... Or someone here will likely figure it out too.
        Cheers!
        When the going gets weird... The weird turn pro!

        Comment

        Working...
        X