Adding FX loop in Orange Dual Terror

[javableak]

Hi, first a greeting, because I'm new to this forum.
I'm buying a Orange Dual Terror head, and I want to add a FxLoop, I know you can do, but I find very little information on how to do it.
First, I find the schematic of amplifier. I have a knowledge of electronic amplifiers, but with so little information, not to start, if anyone has information, I appreciate you send me.

Greetings.

[Chuck H]

You may get lucky if someone here is familiar with that amp. Otherwise you will need to post a schematic. Then there are many here that can help.

[J M Fahey]

Never saw a Dual Terror schematic, but as a reference, Effects Loops are useless in (regular) Tiny Terrors because their distortion, if not on full power, comes from a PPIMV.
So after clipping you have *two* , out of phase signals, over 100V PP each.
*HOW* do you interface that to Effects Pedals?. Impossible.
And if you add an effects loop before that stage, it's still pre-distortion and you might as well use the pedals up front ... and with much less hassle.

[Chuck H]

+1
Another possible solution could be a speaker driven line out to send to effects and a smaller SS amp to amplify the effected signal for blending.