Tweet
No, transformers have not been moved.
Peavey tech support responds, "Check the amount of ripple and look at the caps….if those are leaking, then shotgun all four diodes, too. Should be more like 500VDC. Also at one time we had a supplier using glue to hold parts down that over time became conductive so look at any hot glue or silicone caulk that is in the area of the high voltage as this might be what you are chasing."
I will try clipping in an additional reservoir cap to see if it makes any diff.
Peavey tech support responds, "Check the amount of ripple and look at the caps….if those are leaking, then shotgun all four diodes, too. Should be more like 500VDC. Also at one time we had a supplier using glue to hold parts down that over time became conductive so look at any hot glue or silicone caulk that is in the area of the high voltage as this might be what you are chasing."
I will try clipping in an additional reservoir cap to see if it makes any diff.
Comment