Orange OR15 schematic needed

[Arty]

Anyone have the schematic for this amp? Many thanks in advance

[sloan_amps]

I guess no one has this schematic. I'm needing it too, but have had no luck anywhere I've looked. I'd even settle for a Jim Root Terror schematic since they use the exact same PCB and I could determine the component value differences by comparing it to my OR15. Maybe we'll have some luck soon with this!

[soundguruman]

Len Knitter
Orange USA - Technical Customer Support
2065 Peachtree Industrial Court, Suite 208
Atlanta, Georgia 30341
ph: 404-303-8196
fax: 404-303-7176
len.knitter@orangeusa.com
www.orangeamps.com

[sloan_amps]

Thank you soundguruman! I've sent an email to Len requesting assistance and I'll report back the results as soon as I hear something.

[soundguruman]

Orange OR15 SCH 115V-230V.pdf
Orange DarkTerror-JimRootTerror-OR15 tube layout.pdf
Been having a time lately attaching PDF docs.
Apologize in advance, if all you get is a blank page.
Message me and include your e mail, and I will try to forward that to you...

OK well just tried it, and it worked.

Indecently, only look at this if you are a qualified technician.
Only qualified techs should work on amps, as you all know.

[sloan_amps]

Thanks a lot soundguruman! Very much appreciated. I received an email from Len just as I received notification of your message. Len said they are only able to distribute schematics to qualified technicians, which I am, but since I now have the schematic from you, I won't trouble Len any further for now.

Thanks again for all the help.

[soundguruman]

Being an orange service center, is like being a Maytag repairman...
The phone never rings.

Orange makes some great sounding amps, and they very rarely break.

Yup, they make some damn good amps.
I would like a Tiny Terror. Crunch for days, dude.

[Steve Naples]

Hi, yes, I know this is my first post here.
I have been a tech for many years, started when I was in the Navy, I also play rock and metal, and mostly Marshall amps. I have a 1986 JCM 800, and a 2013 DSL100H, as well as the JR head. I always like to have the schematic for my equipment, mods, troubleshooting, what ever.
Is this schematic valid for the Jim Root #4 head? I thought that they had different tone stacks?

Thanks,
Steve

[soundguruman]

Don't know.

[Steve Naples]

Is there a separate schematic for this head? Does anyone have one? I guess I can email Orange.