Fender BXR Dual Bass 400

[telecaster]

Need a schematic for the Fender BXR Dual Bass 400 amplifier. Thanks!

[g1]

Fender will email you a copy if you ask here: consumerrelations@fender.com
Then please post it here.

[NZaudio]

I have a bxr200 manual if that helps?
Send me a mail as I can't put the pdf in here

[DrGonz78]

Well regardless of anyone else finding the schematic... Here it is...

[oc disorder]

There was a Fender Bulletin regarding the output transistors

Dual Bass 400 Changes
Replace the eight MJ15003 transistors with MJ15022 transistors to increase the safe operating area
of the output stages. Use Motorola or equivalent parts only. the Fender part number is:

025744 type MJ15022 NPN power output

I had one a little while ago with a lot of cracked solder joints on the rear upper back panel pcb
particularly around the multi-ribbon connector pins.
It still had the original MJ 15003's which seemed to be "hangin' in" !

I mentioned to the owner that Fender had upgraded the outputs but we decided
"if it ain't broke don't fix it " except if he started blowing o/p transistors it may be a good idea
to replace the lot.

The power transformer had a nasty laminations rattle in sympathy with the mains cycles
which was impossible to dampen but the owner wasn't too bothered about that.

[telecaster]

Thanks for the info!

DrGonz78 - thanks for the schematic and also thanks to oc disorder for the updated output transistor info.