Tweet
New member here but long time lurker. Need schematic for RH150D G3 plus. I have a scratchy clean channel volume pot that might need to be replaced. I took the amp apart and cleaned all the pots but I'm waiting overnight to power it up. Greatly appreciate this forum!! Alot of smart folks here for sure.
-
-
Welcome to the place!
I had a look in my Randall folder. No dice. You might just call them or shoot them an email and ask. FYI, lots of schematics don't have part numbers for such things unless it's a complete service manual. If you already have it nailed down to a bad pot, just ask them for part information and order it directly from them. Or, if you want to post a picture of it with value and taper, we can probably find one for you.
Contact us - Randall AmplifiersRandall Amplifiers"I took a photo of my ohm meter... It didn't help." Enzo 8/20/22 -
Turns out I probably wont need a schematic, the value should be on the pot. Thanx for your help!!Comment
Comment