Tweet
Hello!
After pressing the phanton button the unit come down and not power on again. I opened and disconnected the flat cable (user interface), measured all power lines in TP that seem be ok, except 20v measured 18v.
When reconnecting the flat cable (user interface) the LEDs for each channel flash in sequence. Sometimes all LEDs and VU turn completely off.
Even with all the LEDs off when connecting the UX8 to the computer, the USB icon is displayed, but with the message of error on recognizing the device.
I noticed that the transistor Q20 is missing, is it exploded or removed from the board by previous owner?
Does anyone have a schematic or service manual for the Line 6 Toneport UX8?
Thank you!
After pressing the phanton button the unit come down and not power on again. I opened and disconnected the flat cable (user interface), measured all power lines in TP that seem be ok, except 20v measured 18v.
When reconnecting the flat cable (user interface) the LEDs for each channel flash in sequence. Sometimes all LEDs and VU turn completely off.
Even with all the LEDs off when connecting the UX8 to the computer, the USB icon is displayed, but with the message of error on recognizing the device.
I noticed that the transistor Q20 is missing, is it exploded or removed from the board by previous owner?
Does anyone have a schematic or service manual for the Line 6 Toneport UX8?
Thank you!
Comment