Need Schematic for Crate CR-45

[goldtop5]

I've been working on an old school Crate CR-45. The signal was cutting in and out. I pulled it apart to redo a few cold solder joints and use contact cleaner to clean the pots, jacks and switches. Since I've reinstalled the preamp board back into the chassis, it now does not pass signal. Does anyone have a schematic for this amp?

[nosaj]

I've been working on an old school Crate CR-45. The signal was cutting in and out. I pulled it apart to redo a few cold solder joints and use contact cleaner to clean the pots, jacks and switches. Since I've reinstalled the preamp board back into the chassis, it now does not pass signal. Does anyone have a schematic for this amp?

Could not find one. What tools do you have? DVM, scope audio probe?Link below for probe. will require another amplifier or an amplified speaker.
https://www.diystompboxes.com/pedals/debug.html
nosaj

[Jazz P Bass]

Here you go: CR-45 Schematics.pdf

[goldtop5]

THANKS!!!

[vintagekiki]

https://supportloudtech.netx.net/loud-public/#category/13002

https://supportloudtech.netx.net/loud-public/#category/13059