Allen and heath zed60 10fx mixer

[Andyb75]

Hi guys new to the forum
Does anyone have the schematic and service Manual for the above mixer? It does not power up anymore
I managed to drop it from my dj booth shelf and at least one of the Capicitors on the power board has burnt out I need to know the value
Hopefully I’ll be able to fix if not can someone explain the procedure I have some basic electronic knowledge many thanks

[vintagekiki]

https://elektrotanya.com/showresult?what=Allen%20heath&kategoria=&kat2=all&page=1

https://elektrotanya.com/allen_heath_zed_series_psu_sch.pdf/download.html

[Andyb75]

Brilliant thanks kiki
Any ideas where I can get the two capicitors C23 ,C29 and resistor R1 from

[Andyb75]

https://elektrotanya.com/showresult?what=Allen%20heath&kategoria=&kat2=all&page=1

https://elektrotanya.com/allen_heath_zed_series_psu_sch.pdf/download.html

Hi thanks Kiki does anyone know what the values of R1 C3 C29 and where I can buy them from at all on the psu schematic thanks

[vintagekiki]

R1 = 1M2 = 1.2 MΩ = 1200 kΩ

C3 = C29 = 100N = 0.1 µF / 275 V~

R1 C3 is a filter that softens the "shooting" when it is switched on (anti click)

C29 C30 C31 L8 is a EMI (RFI) filter

[vintagekiki]

http://remont-aud.net/load/drugaja_apparatura/vsjo_ostalnoe/allen_heath_zet10_fx/247-1-0-44809 *

* Registration is free

[Jazz P Bass]

"Hopefully I’ll be able to fix if not can someone explain the procedure I have some basic electronic knowledge many thanks"

Please be careful in there.

The power supply is of the switch mode type.
The primary side is connected directly to the mains supply.

allen_heath_zed_series_psu_sch.pdf

[Andyb75]

"Hopefully I’ll be able to fix if not can someone explain the procedure I have some basic electronic knowledge many thanks"

Please be careful in there.

The power supply is of the switch mode type.
The primary side is connected directly to the mains supply.

[ATTACH]51008[/ATTACH]

Hi guys yes of course it won’t be connected to mains power while I’m removing that part
By the looks of the things it’s just the C29 capicitor I need does anyone have a link to where I can get one from at all?

[vintagekiki]

... By the looks of the things it’s just the C29 capicitor I need does anyone have a link to where I can get one from at all?

https://www.google.com/search?hl=en&as_q=0.1+%C2%B5F+%2F+275+V~



https://www.buerklin.com/en/film-capacitor/p/50d3945

https://www.conrad.com/ce/en/product/458325/MKP-thin-film-capacitor-Radial-lead-01-F-275-V-AC-20-15-mm-L-x-W-x-H-175-x-6-x-12-mm-1-pcs

https://www.digikey.com/product-detail/en/panasonic-electronic-components/ECQ-U2A104ML/P10730-ND/281393

[Andyb75]

"Hopefully I’ll be able to fix if not can someone explain the procedure I have some basic electronic knowledge many thanks"

Please be careful in there.

The power supply is of the switch mode type.
The primary side is connected directly to the mains supply.

[ATTACH]51008[/ATTACH]

Thanks guys does anyone have a link where I can buy the C29 component at all

[nickb]

Thanks guys does anyone have a link where I can buy the C29 component at all

Please attach a picture and/or provide dimensions. Also update you profile with your location as it is not possible to provide a useful link if we don't know where you are.

[Jazz P Bass]

C29 is a 0.1uf/ 250 V capacitor
https://www.mouser.com/ProductDetail...AVl6pXztpQw%3d

Unless there is a short across it's legs, I highly doubt that is your problem.
It only acts as a line to line filter.