Schematic for Fender Footswitch?

[Axtman]

Does anyone have (or know where I can get) a schematic for Fender footswitch P/N 0055592000? This footswitch is the hard angled trapazoid shap that has three buttons labled: Channel Select, Reverb/Delay, Chorus/Modulation.

[dmeek]

It's in this schematic

Princeton stereo chorus dsp_schematic.pdf

[g1]

pg.1 of attached

[Axtman]

See! This is why I keep your guys around! ;-)

Thank you!

[Enzo]

For future reference, please tell us the model it serves. Usually the FS is included on the schematic.

SOme data:

[Axtman]

Thank you Enzo. Yes I forgot to add the information. I will in the future!

BTW it is for a Fender Princeton Chorus, the infamouse "Red Knob" combo amp with two ten inch speakers.

[g1]

Thank you Enzo. Yes I forgot to add the information. I will in the future!

BTW it is for a Fender Princeton Chorus, the infamouse "Red Knob" combo amp with two ten inch speakers.

The red knob Princeton Chorus uses a 2 button footswitch (schematic attached). The one you have is for the Stereo DSP newer version.

Or are you planning to convert it?

[Axtman]

G1,
That is puzzling. I had a Fender Ultimate Chorus (big brother to the Princeton Chorus) that used a 3 button footswitch.

The Princeton Chorus does have reverb that can be switched in and out. I dug out a two button (Channel Select and Chorus) footswitch and it does work with the amp. Other Fender two button footswitches, of that boxy style, do not work with the amp.