Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.1586 seconds.
Keywords
Members
Tags
-
I haven't been able to measure any change in resistance, capacitance, or overall sound between unpotted and potted. It's plastic, filling the space between...
-
I haven't seen an actual specification of the viscosity of CPES, but it's somewhere between alcohol and water, about like the super-thin CA glue. It definitely...
Leave a comment:
-
Bob;
I've been potting all of my pickups with a special super-thin epoxy called CPES (Clear Penetrating Epoxy Sealant), made by Smith &...
Leave a comment:
-
I've been getting my Alnico rods from Cullen-Legois Manufacturing in Sturtevant, Wisconsin. They are a small manufacturer that specializes in magnetic tools...
Leave a comment:
-
I played around with these when I developed and built my winder about 13 years ago. I built mine with a nice industrial Baldor DC motor and speed controller....
Leave a comment:
-
Actually, I'm left handed too. And, because it's my machine, I built it so that all the controls are over on the left side. I sit with my head straight in...
Leave a comment:
-
I designed and built it myself, about 12 years ago. It's what you would call a semi-automatic linear-feed winder. The feed is mechanically synchronized to...
Leave a comment:
-
Here's a picture, if I wasn't clear. I drew the wire path in red....
Leave a comment:
-
I mount the 5 lb spool back behind my winder, with the axis nearly horizontal. It's tilted up about 10 degrees, back about 12", with the center pointing...
Leave a comment:
-
David, that seems low. I wonder if you have something else causing the shorting problem?
I'm running #41, which is slightly heavier, but it's...
Leave a comment:
-
Yes, that's the right kind of tension gauge, and the right measuring range. It measures tension by the side-to-side movement of the tip of the lever. Hold...
Leave a comment:
-
This is the type of tension gauge that you want:
Mecmesin Tension Gauge | eBay
This is a 0-50gm gauge for $10. Look for one with a range of 0-30...Last edited by Bruce Johnson; 01-16-2015, 08:57 PM.
Leave a comment:
-
I may be there for one day. I'm not sure yet. I never have a booth there, because I only sell my basses directly to the public. I don't use dealers, and I'm...
Leave a comment:
-
Ken;
How do you do the embossing? An EDM-cut steel die and a press? I'm thinking about doing that for some of the parts I make for clients,...
Leave a comment:
-
Hey Chris;
A quick suggestion, now that I see what you are doing. If I make the face plate for you out of 3" diameter aluminum, I can easily...Last edited by Bruce Johnson; 01-14-2015, 01:51 PM.
Leave a comment:
-
That CriCut machine is very interesting. So, it does a decent job engraving aluminum? Do you just feed flat sheets into it? I may just get one of those machines....
Leave a comment:
-
Yes, I'm fine. I think. What day is it?
I hope you understand that we are now at N-7; that is, 7 days until the NAMM show. As usual, I'm in...
Leave a comment:
Leave a comment: