Silicone window caulk
It's everywhere!
Is this standard?
Is there a product that will help get this removed/cleaned...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
10 results in 0.0052 seconds.
Keywords
Members
Tags
-
Last edited by Artspoke; 01-19-2011, 08:08 PM.
-
Checking filter caps
The solder joints look like brand new throughout the amp - including the ones on the main filter caps (C51, C54 = 5600uF...
Leave a comment:
-
-
Ampeg BA115HPT in trouble
I've got my friend's amp here - it hums loudly no matter how you have it set. Ii will amplify the bass some, but the tone starts to crackle and pop badly...
-
OK, with a little modification, this works great!
I changed R1 to 1M, and put a pot in in place of R3, and eliminated C2 (the response was...
Leave a comment:
-
Ok, I found another schematic for the LM3915, after a _lot_ of searching, that uses a couple of diodes ahead of the input:
...
Leave a comment:
-
I think my LM3915 is damaged, or that I'm getting some strong oscillation from the compressor to the meter. I found a link, http://sound.westhost.com/pr...
Leave a comment:
-
Thank you for the speedy reply!
I'm reconnecting the meter circuit right now. If I tap pin 8, what should I see, output from the compressor?...
Leave a comment:
-
Compressor build
Hello all!
Great Forum!! I've just completed a build for Jack Orman's Q&D Compressor 2, based on the Analog Devices SSM2166 IC. I love...
-
Line Level input?
I'm almost done building the Q&D2! The SSM2166P chip is out of production, so I got the SSM2166S (SOIC - surface mount),...
Leave a comment:
Leave a comment: