Announcement
Collapse
No announcement yet.
Search Result
Collapse
58 results in 0.0107 seconds.
Keywords
Members
Tags
-
On the layout drawing, I see 4 resistors and a cap flowing into the junction of the 820 and 100 ohm resistors. Could one of those be throwing things off?
-
Although the problem could be a lot of things, you might try testing the input jacks before moving on. If the problem goes away when plugged into one of the...
Leave a comment:
-
Lots of good posts here. I'm gonna throw Mike Bloomfield into the mix; just about anything from his Super Session/ Electric Flag/ Live at Bill Graham's Fillmore...
Leave a comment:
-
This is just a wild guess. You may have a bad or slightly bent input jack where the switching tab is not making a solid connection and vibration is setting...
Leave a comment:
-
Did the amp sound that bad before the cap job? If not, I'd go back and check my work. The symtoms sound similar to an amp I worked on a few months ago. Problem...
Leave a comment:
-
I use a Boss DM-2 analog delay for some subtle ambience and usually one overdrive pedal. Lately it's been a DOD OD/250 or a Boss SD-1. My amp is a modded...
Leave a comment:
-
I think you need to make a pilgrimage to Nashville. Simon Ripley's on 8th Ave S. has Divided by 13 and I'm sure you can find most of the other amps you've...
Leave a comment:
-
The Fishman Powerbridge features a blend control that mixes a magnetic pickup with an undersaddle piezo. I don't have a schematic but maybe someone on the...
Leave a comment:
-
I liked your idea of using P-90 style pickups. They really sound good with a 5E3. I'm currently using Duncan Phat Cats in one of my guitars. Very nice pi...
Leave a comment:
-
-
I decided to go with a 250k pot in a project box. Works great and may even have some apps for guitar. Thanks to everyone for your replies.
...
Leave a comment:
-
Enzo, thanks a lot. I think something like that should fill the bill. I really appreciate the reply.
Tubeswell, I think the 5E3X2 is the "Double...
Leave a comment:
-
Is there any possibility your LP could be a Nashville flood guitar? Soundcheck was under water here and many more guitars were damaged in private homes. If...
Leave a comment:
-
Padding down 5E3 input for keyboard
My guitar amp is a Weber 5E3 Proluxe. I'd like to be able to use it for practice and low volume gigs with my keyboard (an Alesis QS6.1) but a hot signal from...
-
Maybe they were pushed in at some point. A plain G string has a lot more output than a fifties-correct wound G. The mod would make sense to get a better balance...
Leave a comment:
-
Will you be using a choke or a resistor in it's place? What about a switch between them, or between two different value resistors? It might be nice to be...
Leave a comment:
-
Is there any way you could swap out the pan with one that's known to be good?
Leave a comment:
-
It's worth mentioning that some players will jump the tone control off the center (output) lug of the volume control rather than the input lug or the switch....
Leave a comment:
-
Strats can be difficult to EQ. If you set your amp bright to get that classic Knophler sound in positions 2 and 4, positions 1,3 and 5 will probably be on...
Leave a comment:
-
I had a similar problem that turned out to be an unused input jack gone bad. They are equipped with a little spring-switch that closes the circuit when not...
Leave a comment:
Leave a comment: