Hi Guys,
Does anybody have the measuremets (referenced from the back, non-beveled corner, to the front and then down)? I found a schematic...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
85 results in 0.0097 seconds.
Keywords
Members
Tags
-
BFTR Tilt Back Leg and Stopper Placement?
-
(Remove egg from face) Thanks a bunch! I was quite perplexed by the ten page schematic!
-
F-50 bias mod - schematic included
I wanted to make the bias adjustable. Is the resistor I need to downsize and add a serial cermet pot the 56k on the left side of the by the "FB"...
-
M-1000 has an appetite for preamp tubes, help?
I recently traded for a Metaltronix M-1000. It needed a little work and I have it running but it does eat a 12AX7 in V2 every once in a while. I have ordered...
-
Mig-50 PI type parasitics after a few hours
I have an early Mig-50 with quality tubes, correctly biased and generally well taken care of. The amp doesn't blow fuses and sounds fine until I've given...
-
Hi Dave,
I finally got around to the TR vibro mod you described and it works just great. A slight creeping tick remained after all my other...
Leave a comment:
-
Ted was an awesome guy on so many levels and I was sadened by his passing. I do take solace in the fact that his suffering has ended and while life is preferred...
Leave a comment:
-
The good news is that now the prior art can't be used against you for the "machine" but sadly you have dedicated the "method" to the public....
Leave a comment:
-
3/8" for Music Man rear baffle
Definately 3/8", the baffle looks great and I just used regular contact cement5 because the mojo...
Leave a comment:
-
Assumptions...
Thanks for the reply!
I have a music man 210-65 that I've made an upper rear baffle for. I made this bafffle...
Leave a comment:
Leave a comment: