Announcement
Collapse
No announcement yet.
Search Result
Collapse
16 results in 0.0049 seconds.
Keywords
Members
Tags
-
Thanks Jon, thank you for the offer but, i think they're fairly cheap, I will try to find it locally, otherwise I'll order 1 or 2 online somewhere,
-
-
The size of the rectifier is 1.5cm X 1.5cm X 75mm aprox. Yes the +,- and ac markings are on the top. I simply don't know enough about these to select the...
Leave a comment:
-
-
Samick SM60RC guit amp schematic
Would someone here know where I can find the schematics for the Samick SM60RC amp? Originally, it blew the fuse, after troubleshooting the bridge rectifier...
-
So by your drawing.., A=70mm, B=60mm, C=35mm. The other transformer I sourced is much smaller and just won't do. I have to keep looking in local electronic...
Leave a comment:
-
Hi Guys, I answered the dimensions , its 70mm L (red arrow) x 70mm W(yellow arrow) x 60mm H (green arrow). The lamination thickness is 35mm. Also, under the...
Leave a comment:
-
Here are the dimensions and spacings between other components, like Enzo said this chassis slides into the cabinet so space is restricted. Also, the $19US...
Leave a comment:
-
I'm afraid it wont fit. The original is 3" and there isn't enough room to fit a bigger one. Otherwise, I just sourced locally another transformer 54VCT...
Leave a comment:
-
J M Fahey, I wasn't too sure of what I needed, and I looked at the Hammond line and they are expensive. So, I need to know the dimensions of the antek to...
Leave a comment:
-
Sorry, re-phrase, I meant to say a 110v transformer that needs a 50Vac CT output to supply the rails.
Other than dimensions, do I need to take into...Last edited by webber; 01-13-2022, 02:41 AM.
Leave a comment:
-
Peavey Minx II Bass amp transformer replacement questions
I purchased this Peavey MINX-II bass amp with a 220V transformer, I don't own a step up transformer to be able to use it. I contacted peavey for a 110v transformer...
-
Well after more testing and checking I found the problem.
as 52 Bill suspected "the headphone jack speaker cutoff contact" maybe this is...
Leave a comment:
-
All conditions seem to be present, unless the output is shorted?
I suspected the TDA to be the problem in the beginning, I replaced it and when it...
Leave a comment:
-
Thanks 52 Bill,
I double checked all solder joints and traces, all appear good, no shorts or broken traces were found.
So, I fed a tone into...
Leave a comment:
-
Peavey KB/A15 repair Help
I was wondering if someone could help me determine the problem.
I purchased this amp used, when I plugged my keyboard into it the 1st time, the sound...
Leave a comment: