Announcement
Collapse
No announcement yet.
Search Result
Collapse
44 results in 0.0047 seconds.
Keywords
Members
Tags
-
I'm thinking the same. I actually had to UNcrimp the bracket (top and bottom) to get it off. There must be some critical clearance across this strip, enough...
-
The top and bottom of the bracket are completely different , won't go on if upside down. The strips move side to side when working (if you hold you finger...
Leave a comment:
-
Need help with re-assembling a ganged switch (on a DBX unit but really any unit)
Have this ganged switch in my DBX that I need to put back together. See pic. I have seen these same types of switch in receivers etc. There is a little strip...
-
yep I got it. I have the wiring diagram you provided in the original years old post and already confirmed with a simple shorting pin/wire at the amp jack...
Leave a comment:
-
Thx. I had seen your previous post regarding the footswitch configuration and I totally understand how that works and certainly intend to rewire correctly...
Leave a comment:
-
I'll share a recent story if anyone here is still listening to this thread.
Just picked this amp up. Footswitch cable had electrical tape...
Leave a comment:
-
For the brand cleaner I use (WD-40), I find the tubes too large for the little hole, thus most of the fluid just sprays out on the board instead of getting...
Leave a comment:
-
You'll get much better cleaning and coverage if you can bend the tip of your cleaner and spray from the underside of the pot - where the 3 pins connect. Trying...
Leave a comment:
-
I suspect, though can't confirm, the caps blew and the user just starting flipping switches to get the unit to work. I'm actually surprised the main system...
Leave a comment:
-
So since I'm all about learning, how did this voltage switch specifically affect things? Like in relation to the D401 power diode etc.
Leave a comment:
-
Brilliant! It was set to 230!!! Someone gave it to me in trade but it didn't even cross my mind to look at that voltage switch on the back. I was head down...
Leave a comment:
-
If I plug just the left channel connector in, the voltages show +12v/-12v. Same if I just plug the right channel in. When both are in it drops to +8v/-8v....
Leave a comment:
-
Sorry - forgot to mention the relay never clicks. I assumed it was because of the protection circuit but could be something else like a failed relay I guess....
Leave a comment:
-
Alesis RA150 Power amp repair help needed
Got this alesis power amp. Turns upon power shows protect for several seconds then appears to go normal, but there is no sound in either channel. Upon internal...
-
Fender 112 SE hum issue, also Inductor coil part replacement help needed
Was working on this fender amp that has a hum issue regardless of channel selected, all controls zero. Even occurs when power amp in patched into. Someone...
-
-
I totally hear what you are saying. My experience is quite limited and still learning everyday. To date, most of the failures I've seen, especially in regards...
Leave a comment:
-
So based on everything presented to date, what is the summary synopsis here? Q11 up and died on it's own and took out Q12? Or Q12 up and died on it's own...
Leave a comment:
-
Leave a comment: