Is Tone Kraft getting any better with turn around times and customer service? I like their products but sometimes they take to long.
has anybody used...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
12 results in 0.0028 seconds.
Keywords
Members
Tags
-
Tone Kraft service?
-
Winding specs for Filtertron
Im building my first set of Filtertron type humbuckers. I’m planning on using 42 awg poly. Any suggestions as far as winding count or ohms per bobbin?
-
They are complete. 5.7 bridge & 5 in the neck. ...
-
-
-
I did tell the builder it will be in the spirit of the elrayo but by no means will it be one. My opinion is quality parts good workmanship and attention to...
Leave a comment:
-
I don’t have a coil estamator. I am using 50 mm string spacing. Basically I’m using the A/8 in the bridge and A/5 in the neck because that’s the specs they...
Leave a comment:
-
I took a guess with the 40 I’m hoping the taller humbucker coils I made will allow me to apply more wire.
Leave a comment:
-
I am fully aware that these will be low dc. That is the point but my design has more steel in it with two keeper bars for the screws. My biggest concern is...
Leave a comment:
-
He basically wants an el Rayo clone.
I'm pretty sure the taller coils and
12 screw pole pieces will suffice
Leave a comment:
-
These are the my own design they are taller than standard hb bobbins. I hope to get more 40
awg wire on. ...
Leave a comment:
-
Winding a humbucker with 40awg wire. Any thoughts?
I'm have a customer that wants a humbucker for people who hate humbuckers. I have some 40 awg on its way. Also I plan to use A/8 for the bridge and A/5 in...
Leave a comment: