Announcement
Collapse
No announcement yet.
Search Result
Collapse
25 results in 0.0066 seconds.
Keywords
Members
Tags
-
Thanks for your replies. I guess I should have read the "mischievous troll" thread. (Funny that amp has problems for C to C#, my amp has weird noises...
-
Buzzing noise only when I play a D note.
I have an old brown Fender Super, 6GA4. The filter caps are reasonably new, the electrolytics have been replaced as well as the plate resistors. The preamp...
-
I bought these Alpha pots from smallbear - Alpha Single-Gang 16mm Rt-angle PC Mt. Knurled Shaft
Not a perfect fit, the holes on the enclosure...
Leave a comment:
-
I know nothing about this except it was reviewed in the Oct 2008 issue of Guitar Player (the one with Sonny Landreth on the cover). They gave it a good review...
Leave a comment:
-
I know this is not what tone purists would recommend, but how about just putting a buffered pedal in front of it? Wouldn't a boss tuner (TU-2) or similar...
Leave a comment:
-
A workaround is good, I didn't realize that the alpha pots are thin enough to fit in the space between the circuit board and the case. I was starting to think...
Leave a comment:
-
Chandler Tube Driver pots
Anyone familiar with these pots? They are extremely noisy, and barely any signal gets through. How do you clean them? They don't look too easy to open and...Last edited by Andrew M; 05-05-2008, 05:43 PM.
-
Modern Capacitors
It seem to me that people shy away from the newer smaller electrolytics that are available. Like these Panasonic caps
http://parts.digik...
-
Yeah, I guess it will need a cap job - it looks like a early 70s model (the schematic is dated 1972). It came with a 2 x12 cabinet (YT-12) so it should...
Leave a comment:
-
Got it now, thanks. I got the top off. I don't think it had ever been opened before and was stuck on pretty good. It looks completely stock, I am not planning...
Leave a comment:
-
Help Removing Bassmaster (YBA-1) Chassis
Boring topic I know, but I am stumped here. I have removed 4 bolts on top and two on each side and assumed I could slide the chassis out the back. It can...
-
A two pack of the bulbs sell for $3. Yeah it is a rip-off for as you say a 47 cent part, but most of the local electronics suppliers have closed shop in the...Last edited by Andrew M; 01-16-2008, 08:21 PM.
Leave a comment:
-
Thanks for the schematic, that is the one I have. I found a bulb for a couple of dollars at a local electronics shop that meets those specs (28v, 40mA). I...
Leave a comment:
-
Does it have a built in loop function?
The picture of the footcontroller on the site http://www.mackie.com/home/showimage.html?u=/products...
Leave a comment:
-
Thanks for your advice, the trimpot sounds like a cool idea. I like the wah, but it is not subtle, it might be nice to tone down the effect sometimes....
Leave a comment:
-
Morley Power Wah Questions
I recently got an older AC powered wah. It worked fine for a while and then stopped. Easy enough to fix, the light bulb was burned out (for the LDR part of...
-
It was a bit louder, and seemed more dynamic (touch responsive). It does the chimey Fender thing (clean with just a bit of dirt) when strumming chords and...
Leave a comment:
-
If it is that the one with 2 12ax7s, 2 6v6s and a 5y3 rectifier, then I had one of those. I rebuilt mine as a Fender tweed (5E3) and it sounds so much better....
Leave a comment:
-
For what it is worth, I got my DM-2 for a couple of bucks at a garage sale. The zener D4 was blown, shorting out the power supply. Cheap to fix, but it took...
Leave a comment:
-
I searched for the same file using Google (search for "bossDM2.jpg") and found this link
http://www.mif.pg.gda.pl/homepages/tom/...
Leave a comment:
-
Boss Wall Wart Repair (PSA-120t)
It has a intermittent break right where the wire leaves the wall wart. Is is possible to open it? I removed the two screws on the back, but I still can't...
Leave a comment: