Hi Everyone,
I'm hoping someone can please take a look at these voltages on my SWR Workingman's 15". The unit is connected to a bulb current limiter....
9 results in 0.0044 seconds.
-
SWR Workingman's 15- Voltages- DC on Speaker
-
SWR LA15 input jack not working
I have a SWR LA15 Bass combo amp. The input jack where I plug my bass in, doesn't work, well, barely works. When I wiggle it a little, I get some sound,... -
SWR 550X Repair
Hello,
Can someone here recommend a repair facility for sending out a SWR 550X for repair. Third party , independent shop etc.
... -
SWR LA 15 Weak Output
Hello, I am repairing a SWR LA 15 amplifier, originally the amp would make a wierd noise only after being on for a long time and after it got hot it was like... -
SWR LA15 Bass Amp - Blowing "outputs" - Class-A amp mod question.
Hello, I was given this 100W bass amp "cube" from a fella whom repeatedly "blew" the 2SC2837, TO-3P output transistors. After the third... -
SWR WorkingPro 2x10c distortion issue
Hello friends,
I have an SWR workingpro 2x10c solid state combo amp. When running a signal into the standard input with all pots set at 12 o clock,... -
SWR WM 4004 headphone jack resistors
Hi,
I have an SWR workingman 4004 on my bench where the 2 resistors tied from the speaker on/off switch to the headphone jack are fried beyond recognition.... -
SWR Bass 350 Capacitor rating?
I read a thread here where someone had an SWR Bass 350 with an output buzz (In other words, the pre-amp was fine). Enzo pointed to a capacitor being the cause... -
SWR Workingpro 2x10C footswitch
Simple one: could anybody provide the pinout for the 5-pin DIN footswitch connector found on the SWR Workingpro 2x10C combo?
It is supposed...
