Announcement

Collapse
No announcement yet.

Fender 15r - frontman board

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fender 15r - frontman board

    I have a fender frontman 15r which I have to replace the input jack
    can anybody tell me how to remove the circuit board from the cabinet
    I have looked everywhere - but not much luck

    I have it loose but it just won’t come out of the cabinet
    do I need to remove the reverb tank to get it out ?
    thank you in advance

  • #2
    I never thought about it. Interior photo please? Usually just pull the screws, and take the nuts off the jacks and pots
    Education is what you're left with after you have forgotten what you have learned.

    Comment


    • #3
      Sometimes the handle screws hold the chassis
      nosaj
      soldering stuff that's broken, breaking stuff that works, Yeah!

      Comment


      • #4
        I worked it out -
        the reverb unit is held in with 2 sided tape
        once I removed this - the chais slid out
        they must fit the reverb last and this one may of been sitting a bit high in the cab

        Comment


        • #5
          Oh, you were trying to remove the CHASSIS, you said CIRCUIT BOARD earlier.
          Education is what you're left with after you have forgotten what you have learned.

          Comment


          • #6
            Yes - Now the circuit board

            Comment


            • #7
              You would need to remove all of the front panel knobs from the pots. Then remove the nuts holding the pots to the chassis. You should then be able to slide the board away from the chassis.

              Comment

              Working...
              X