Fender 15r - frontman board

[Gregmw]

I have a fender frontman 15r which I have to replace the input jack
can anybody tell me how to remove the circuit board from the cabinet
I have looked everywhere - but not much luck

I have it loose but it just won’t come out of the cabinet
do I need to remove the reverb tank to get it out ?
thank you in advance

[Enzo]

I never thought about it. Interior photo please? Usually just pull the screws, and take the nuts off the jacks and pots

[nosaj]

Sometimes the handle screws hold the chassis
nosaj

[Gregmw]

I worked it out -
the reverb unit is held in with 2 sided tape
once I removed this - the chais slid out
they must fit the reverb last and this one may of been sitting a bit high in the cab

[Enzo]

Oh, you were trying to remove the CHASSIS, you said CIRCUIT BOARD earlier.

[Gregmw]

Yes - Now the circuit board

[Delta362]

You would need to remove all of the front panel knobs from the pots. Then remove the nuts holding the pots to the chassis. You should then be able to slide the board away from the chassis.