5E3 part list

[Magatello]

Hi, I want to build my own Tweed 5E3, but I'm not wery expert, so can anyone give me a complete part list of the component (resistor, capacitors, transformer, pot, switch ecc). Many thanks

[MWJB]

"Bom" (bill of materials) is available from Weber VST, check out the kits page.

If you are not very expert, I'd honestly suggest that you buy a kit with an instruction manual, or support (like A Mission Amps kit), there are a few pitfalls with the 5E3 (and any Fender that you might try to build froma schematic alone) that can catch an inexperienced builder out.

[Magatello]

"Bom" (bill of materials) is available from Weber VST, check out the kits page.

If you are not very expert, I'd honestly suggest that you buy a kit with an instruction manual, or support (like A Mission Amps kit), there are a few pitfalls with the 5E3 (and any Fender that you might try to build froma schematic alone) that can catch an inexperienced builder out.

Thank you very much. I alredy build an amp (Marshall JCM 800). I want to try, also because I'm Italian and here in Italy there aren't store where to buy a kit, and buyng it in USA is very expensive because of the delivery.
If I will have some trouble I hope someone gently like you will help me :-))
Thank you again

[MWJB]

OK & good luck. Be sure to check out the pictoral guide to building a 5E3 at Tube Amp Doctor Verstärker Röhren Spezialist - Tubes and Amp Kits