Announcement

Collapse
No announcement yet.

5e3 Bleeder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 5e3 Bleeder

    I am wanting to size a bleeder resistor for my 5e3 build. Anyone have a sizing recommendation (Ohms/Watts).
    I am learning. My posts should not be considered as expert advice or suggestions for you to implement... on the contrary, I am looking for expert advice!

  • #2
    220k 2W across the first filter cap is pretty standard for a permanent installation.


    RWood

    Comment


    • #3
      I do not have a 220k 2watt resistor handy. Could I get by using a 1M 1/2W Resistor for the bleeder?

      It seems it would increase the discharge time by about 4x.
      I am learning. My posts should not be considered as expert advice or suggestions for you to implement... on the contrary, I am looking for expert advice!

      Comment


      • #4
        Do you have 2 x 470k 1W in parallel. That would be fine as well.
        Building a better world (one tube amp at a time)

        "I have never had to invoke a formula to fight oscillation in a guitar amp."- Enzo

        Comment

        Working...
        X