Broken volume pot on Valvestate 8080

[geff]

Hi there,

I've managed to snap the volume pot shaft on my Valvestate 8080. The amp is quite old and well gigged. It's got crackly pots and the valve could do with a replacement. Ultimately I'm just looking to put it in a reasonable state in order to ebay it.

I don't really have much experience with amplifiers but my dad used to be an electronics teacher so I'm sure he can assist. And I'm not too bad with a soldering iron myself.

I just need to replace the volume pot but I cannot find what model pot to replace it with anywhere. Can anyone help?

While it's open I think a good clean of the other pots and probably replacement of the valve would be a good idea. Can anyone suggest which valve to get?

Lastly while I'm asking the experts is there anything that would be worth "tidying" up in there while I have it apart?

Thanks in advance

Geff

[booj]

http://www.mouser.com/catalog/catalogUSD/640/692.pdf

Don't know what you need but this is a starting point

[geff]

Thanks for the link and quick reply. Does anyone know the specifics?

[Stoffie1974]

Hi,
Maybe this could help ... allways original parts.

Potentiometer, Potentiometer & Knöpfe

or

Tube-Town Online-Store - Marshall Potentiometer

You can build an amp from scratch at those sites, they have EVERYTHING !!
Have fun with it.