This is my first thread with this forum. I am sorry if I am being redundant if this topic is covered somewhere, but I haven't found the information I am looking for in this section or the forum. I was wondering what the rule was on the voltage value of caps that are unlabled on a schematic. I am looking into doing a cap job on my '57 Ampeg M12. The uf values are all labled in the schematics but the voltages aren't always and the ones that are labled I have been trouble finding exact matches. Any insight would be great. Thanks for the help, Benjamin
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
question about caps.
Collapse
X
-
And if the amp is in front of you, look on the original parts.
DOn't worry about exact values, if they used 16uf/475v filter caps, you can spend a lot of dough on 16uf caps, or just go with the common 22uf/500v for a LOT less.Education is what you're left with after you have forgotten what you have learned.
Comment
Comment