Tweet
What is the slide switch in the schematic called?
3P3T?
Thanks
3P3T?
Thanks
-
-
Yes. -
Fast reply, thanksComment
-
Double pole 3 pos slide switch....I dunno if DP3T correctly IDs it since a 3T would involve a common contact that switches to 3 others.The farmer takes a wife, the barber takes a pole....Comment
-
Can't seem to find one on Mouser.Comment
-
PM me yer addy....I have a pile of those.The farmer takes a wife, the barber takes a pole....Comment
-
Just to clarify....this is a full size slide switch like a Champ pwr switch but with 3 positions and double pole right? That's what I have here......The farmer takes a wife, the barber takes a pole....Comment
-
-
It's a 3-pole, the schematic just split it up into two places on the page.
I'd agree that 3-throw suggests a common switching to three different contacts, but we have to call this something, so since it has three positions... And as a slide switch, well, I have seen them with a fancy slide contact with spaces in it and a row of stationary contacts so it can be a slider and still have that common. But mostly slider switches work like this one.
That isn;t the sort of thing I'd expect to find in Mouser. But if it were there, it would be under slide switches. Aren't there 3P3T slide switches in the old AMpegs, like for the Deep switches? They may even be 4P, but that is no problemEducation is what you're left with after you have forgotten what you have learned.Comment
-
Ohhh....its a 3 pole. I don't have any of those.....only 2 pole.The farmer takes a wife, the barber takes a pole....Comment
-
Digi-Key part#: SW336-ND CW Industries 3P-3Pos (as they call it). It's a standard-size slide switch. Also comes in PC-mnt version SW618-ND.Comment
Comment