Sho-Bud Repair... Help Needed Please

[MikeBloomfield]

SuCCeSS! Replaced old 'sisters with newer and checked all connex again. Possibly the bias diodes were not making good contact. Still don't know for sure. But she's workin' just fine now.
Thanks for ALL the help!!!

[soundguruman]

SuCCeSS! Replaced old 'sisters with newer and checked all connex again. Possibly the bias diodes were not making good contact. Still don't know for sure. But she's workin' just fine now.
Thanks for ALL the help!!!

Mike Bloomfield? "Room Full of Blues" Mike Bloomfield? Is that YOU?

[J M Fahey]

Even answering "yes", he'd be less FAKE than you and your scuba equipment.
Just sayin'

[soundguruman]

Even answering "yes", he'd be less FAKE than you and your scuba equipment.
Just sayin'

You "WISH" you could dive the North Shore...

[J M Fahey]

In my imagination I can .
Same as you, by the way

[soundguruman]

In my imagination I can .
Same as you, by the way

Yes, my diving is entirely imaginary...

[Steve Conner]

Now now children! Try to stay on topic

[J M Fahey]

Saved by the bell !!!!


Ok Steve, will do.

[soundguruman]

AND I have certifications in:
1. Open water diving
2. Deep Water Diving
3. Advanced open water diving
4.Rescue diving
5. Divemaster
6. Underwater Navigation
7. Scuba equipment specialist certification...
All of which are totally imaginary, earned on the imaginary island of Kauai.
Also, I have worked on control / electrical systems for experimental hydrofoils..all of which are fake.
So if you need a tech, to work on your MTU diesel supercharged marine engine, this fake tech knows all about it.

[Steve Conner]

Fine, but this thread is about troubleshooting a Sho-Bud amp, not James Bond's submersible Lotus.