Well I didn't know these existed with the Molex pins before.
From a 1986 Peavey KB-100 I'm looking at for a buddy. Mounted vertically, input up along the left sidewall of the speaker enclosure. Looks to be an O.C. Electronics but has no label, only a partially obscured stamped number. Measured DCR 97 ohms input, 374 ohms output.
Sadly, though I have succeeded many times repairing broken coil leads to the Molex pins in other tanks this one was broken too close to the coil and I failed. I ordered up a MOD 8EB2C1B in hopes that will be close enough to work. Too bad - the tank looks to be in pretty good condition mechanically.
From a 1986 Peavey KB-100 I'm looking at for a buddy. Mounted vertically, input up along the left sidewall of the speaker enclosure. Looks to be an O.C. Electronics but has no label, only a partially obscured stamped number. Measured DCR 97 ohms input, 374 ohms output.
Sadly, though I have succeeded many times repairing broken coil leads to the Molex pins in other tanks this one was broken too close to the coil and I failed. I ordered up a MOD 8EB2C1B in hopes that will be close enough to work. Too bad - the tank looks to be in pretty good condition mechanically.
Comment