i simply damaged one of the pins on preamp tube socket (V3) on a Marshall JCM 800 2205. any chances of fixing the damaged retainer pin? or should i just use a 7/64 " drill point, drill holes on the 2 rivets and remove the old socket? Replacing it with a spare fender the twin (red knob twin) preamp tube socket which will be fastened to the chassis with screws and nuts?
After solving the above issue should i replace this preamp socket (V3) with a Belton Micalex 9 pin preamp tube socket or isnt there any better material or quality preamp tube socket? My Fender twin reverb reissue sockets have really tight pins.
After solving the above issue should i replace this preamp socket (V3) with a Belton Micalex 9 pin preamp tube socket or isnt there any better material or quality preamp tube socket? My Fender twin reverb reissue sockets have really tight pins.
Comment