Announcement

Collapse
No announcement yet.

Hot rod deluxe RevA channel switching

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #76
    If your meter won't register 1Khz, try 100 or 200 hz.
    "Everything is better with a tube. I have a customer with an all-tube pacemaker. His heartbeat is steady, reassuring and dependable, not like a modern heartbeat. And if it goes wrong he can fix it himself. You can't do that with SMD." - Mick Bailey

    Comment


    • #77
      according to the description my multimeter (Craftsman 82082) has a signal generator. Scoured the net for a “how to” but nothing.
      clueless.
      Last edited by Oldmactech; 08-08-2020, 04:40 PM.

      Comment


      • #78
        Even if it did, you will not be able to use it for sig. gen. and measure voltage at the same time. And you need to do that.
        "Everything is better with a tube. I have a customer with an all-tube pacemaker. His heartbeat is steady, reassuring and dependable, not like a modern heartbeat. And if it goes wrong he can fix it himself. You can't do that with SMD." - Mick Bailey

        Comment


        • #79
          Oil, I get that. So I downloaded an app, will send the signal to input 1 via a 1/8” to 1/4” splitter. Is the 4mV measurement a function of pot volume?

          Comment


          • #80
            The 4mV should be at the input jack. So you will have to adjust the output level of the app device. The amp pots should all be set at 50% as stated in the notes on the schematic.
            "Everything is better with a tube. I have a customer with an all-tube pacemaker. His heartbeat is steady, reassuring and dependable, not like a modern heartbeat. And if it goes wrong he can fix it himself. You can't do that with SMD." - Mick Bailey

            Comment

            antalya escort
            kartal escort
            sex vidio
            altyaz?l? porno
            antalya escort
            Working...
            X