Finally have it up and running. Went ahead and changed out the two 2200uf filter caps, speaker surrounds have been replaced. Cranked it up and sounds really good. I don't have a scope or other equipment to check to see if anything needs to be adjusted per the service manual. Hoping to find someone local to take care of that.
Ad Widget
Collapse
Announcement
Collapse
No announcement yet.
GK 250ML
Collapse
X
-
Originally posted by The Dude View PostIf you only changed filter caps, I don't see why any adjustments would be necessary.
Comment
-
Oh, I see that now. You started yet another thread. IMO, that just adds confusion. You should have just added this information to the existing thread. There's no point in starting yet another thread about the same amp."I took a photo of my ohm meter... It didn't help." Enzo 8/20/22
Comment
-
Originally posted by The Dude View PostOh, I see that now. You started yet another thread. IMO, that just adds confusion. You should have just added this information to the existing thread. There's no point in starting yet another thread about the same amp.
Comment
Comment