valve jr to champ

[words453]

I am using an epiphone valve jr chasis, cab, and speaker for a point to point copy of an 5f1 tweed champ. I was planning on using the valve jr OT for the champ. I am new at this and not sure if it would work properly. Any thoughts or suggestions would be greatly appreciated.

[Tux320]

Yep, it should work fine

[HTH]

trying looking over on sewatt.com for more on this type of thing - it's dedicated to all things SE and Epi VJ conversions are quite commonplace.

the 5k OT in the EVJ will be fine with 6V6s, many people have used them this way.

[words453]

Thanks for the info. I'll give it a shot.

[Burnt Coil]

Best thing about the valve jr is that good looking cab and chassis.

[teletwanger48]

I just finished one of these builds but with beefed up trannys and using a 6l6. WOW... I built one as a 6v6 And this one is quite a bit louder.

Wish I could find a couple more Valve Jr heads or combos that were 'blown' that I could completely re do..

[gecko13]

I just finished one of these builds but with beefed up trannys and using a 6l6. WOW... I built one as a 6v6 And this one is quite a bit louder.

Wish I could find a couple more Valve Jr heads or combos that were 'blown' that I could completely re do..

Turretboards.com has some very nice EVJ boards with an octal socket already installed. I can vouch for the quality, and the price is spot-on.