Tweet
To be fair it was leadfoot's idea. But I'll wager that some of the returned volume isn't just gain, but also improved load matching. Good to know.
-
"Take two placebos, works twice as well." Enzo
"Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas
"If you're not interested in opinions and the experience of others, why even start a thread?
You can't just expect consent." Helmholtz -
Yeah, it's a Mini switch, but a TPDT. I actually had this wired up from years ago just sitting in my box of electronics stuff.
Comment
-
That wee switch with over 478V on it! I wouldn't. I suppose there's only the differential between the screen and plate volts across it, BUT, there's still 478V there that could short to something in a small switch. There's not even a big enough hole in those solder lugs to actually insert any respectable lead wire that would be in use for that circuit! That's a tip off right there. If you haven't mounted it yet I think you should wait for a better switch before actual installation of the mod. If you HAVE mounted it I think you should replace it soon."Take two placebos, works twice as well." Enzo
"Now get off my lawn with your silicooties and boom-chucka speakers and computers masquerading as amplifiers" Justin Thomas
"If you're not interested in opinions and the experience of others, why even start a thread?
You can't just expect consent." HelmholtzComment
-
Done then. I already have a DPDT Carling I'll put in there. Thanks a bunch!Comment
Comment