Tweet
A few years ago I bought a Silvertone amp chassis (seller said Silvertone: it had no markings). It was a rather large chassis with an SE (el-84) section and a PP section, again with el-84's. No tubes came with it but I could tell from the tube sockets. The pots were shot but they had very long shafts approx 4-5 inches. I bought it for the trannys and now I'm trying to figure out how to use them. I have a nice size PT marked C80-33-08 and 606949. When I removed it from the chassis I labeled the wires it powered a 5y3 (tube socket was labeled) rectifier as well as the tubes mentioned above. I'd like to use it for a PP amp with either 6V6's or 6L6's so it would be nice to know it's ratings. Anyone have any ideas on what I've got. Any info would be much appreciated...
-
-
If it was powering 3(?) EL84s, it can probably supply at least 150ma. So it ought to handle a pair of 6V6s easily, but 6L6s might be pushing it.
Hopefully one of the pros here will confirm... -
Yeah, I figure if I can't find out any more about it I can a least use it for a 6V6 amp. That would be fine....Comment
Comment