Announcement

Collapse
No announcement yet.

inside MXR dynacomp!!!???

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • inside MXR dynacomp!!!???

    Hello
    I need to see some pictures of inside of a MXR dynacomp from 70ís.
    From the pcb and the switch and all.
    If you have some pictures please let me know .


    Thank you all in advance

  • #2
    What do you need to know?

    Comment


    • #3
      Mxr

      I need to know where to connect 3 lose wires

      Orange yellow and gray are lose.

      Comment


      • #4
        Jay,

        I've got mine open in front of me (pots up, PCB standing straight up). The orange wire runs between the far-left terminal of the left (Sensitivity) pot & the upper-right solder blob on the bottom of the PCB, and the gray wire goes to the center terminal of that same pot & the lower-left solder blob on the bottom of the PCB (no connection to the right-hand pot terminal). The yellow wire runs from the same Input-jack terminal the other yellow (switch) wire connects to, to the right-center solder blob on the PCB bottom. For reference, there's also a brown wire from the upper-right of the PCB to the switch.
        Let me know if you need the PCB connections and/or a pic (which I can E-mail to you). My unit is red, w/lower-case 'dyna comp' lettering.

        Ray

        Comment


        • #5
          Thank you

          Ray

          Thank you so very much.
          By your help my MXR works now.

          Thank you

          Comment


          • #6
            Jay,

            No problem at all - glad to help. I'm actually happy I opened mine up, as both the box packing foam and PCB-insulating foam were quite deteriorated, and the battery was nearly dead! I better check the other ones now too...

            Ray

            Comment


            • #7
              hello-
              I'm a newbie and need similar help I have an 80's or 90's MXR M-102. I need a picture to help me out. Do you still have the picture mentioned above 4 yrs ago?

              Comment


              • #8
                anyone with a 80's 90's dyna comp photos of the inside?
                thanks

                Comment


                • #9
                  Check out Monte Allum's Mod site... if memory serves he's got pix of several different iterations of the dyna comp pictured so u can order the right parts to mod whichever version you happen to have
                  Hey you... Yeah you kid... Ya wanna buy some "Magic Beans"?

                  Comment

                  Working...
                  X