Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Digitech RP 1000 burned

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Digitech RP 1000 burned

    Hi!
    This is my first post so i hope to find any help on this matter.

    My RP1000 received a mayor peak of voltage on one of mi gigs and stop working, meaning, there's no sound out of it, the lights are on, the switches work, but cero sound. When i finally opened i've found this completely burned.

    https://drive.google.com/open?id=0B3...i14VGx2OXpLRlE

    So i've oredered the piece, it's a MP1542, hoping that when i change it my RP it's going to be back. I have cero experience on changing SMD components and i doesn't know the implication of such damage on other components and i will apreciate any help and pointers on this matter.

  • #2
    Originally posted by Meccanismo View Post
    I have cero experience on changing SMD components
    If you have no experience removing SMD components, you can try ChipQuik:



    You have nothing to loose. In the worst case it will burn again.

    Mark

    Comment


    • #3
      Make sure none of the diodes are shorted: D15,D16,D22 and D23.


      http://music-electronics-forum.com/a...1&d=1498237446
      Attached Files

      Comment


      • #4
        Hey thanks, i'll check those ones

        Comment


        • #5
          Diods 15, 16 read 262
          Diods 22, 23 read 222

          Comment

          gebze escort kurtköy escort maltepe escort
          pendik escort
          betticket istanbulbahis zbahis
          deneme bonusu veren siteler deneme bonusu veren siteler
          slot siteleri
          mobile casino no deposit bonus
          deneme bonusu veren siteler bonus veren
          streameast
          bonus veren siteler
          deneme bonusu veren siteler
          deneme bonusu veren siteler deneme bonusu veren siteler
          bahis siteleri
          deneme bonusu deneme bonusu veren siteler Canlı casino siteleri
          Working...