Announcement

Collapse
No announcement yet.

fat strat mod

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • fat strat mod

    I have a fender strat (originally with single coils) that I have placed a humbucker in the bridge position. I was wondering if it would be possible to mod the wiring so that the neck and middle pickup share volume and tone control while the humbucker has a separate volume and tone control. I understand this would require drilling a hole into the pick guard for the extra pot. I wanna do this because I would prefer to use 500k pots with the humbucker and use the stock pots with the single coils. I also don't like using shared volume since I like to have different volume settings for bridge and neck some times. Any help would be appreciated.

  • #2
    might be worth checking out the schematics section at www.seymourduncan.com (even if the 'bucker you loaded isnt actually SD)

    Comment

    bostanci escort
    istanbul escort maltepe escort
    pendik escort
    sex vidio
    altyazili porno
    antalya escort
    beylikduzu eskort bayan eskort bayan escort antalya sirinevler bayan escort
    gaziantep escort
    atasehir escort
    antalya escort bayan escort atakoy
    izmit escort
    ankara escort
    porno
    Working...
    X