coil tap

[josh_homme]

i bought emg h1a humbucking passive pickups, and i would like to wire them so that i have 1 tone 1 volume, 3way switch, and that the tone pot is a push/pull so that i can coil tap it.
can i do that?
wiring schematic?

[David Schwab]

i bought emg h1a humbucking passive pickups, and i would like to wire them so that i have 1 tone 1 volume, 3way switch, and that the tone pot is a push/pull so that i can coil tap it.
can i do that?
wiring schematic?

EMG uses the same color codes as DiMarzio, so you can use this as a guide:

Free information : DiMarzio Humbucking Pickups at Stewart-MacDonald

Yu want the "coil cut" switch. "Tapping" is something different.

Here's the EMG instructions, but they don't tell how to switch the pickup to single coil:

http://www.emginc.com/content/wiring...MGHZ-H1-H4.pdf

All you have to do is switch the black/white wires to either ground or hot, depending on which coil you want to cut.