I have a Solidbody Gretsch Broadkaster that I am trying to wire in Stereo. if your not familier with the wiring scheme it is 2-3way toggles (one switches between pickups and one is a tone switch) Since there is a tone switch both pots on the guitar are volume controls, one for the neck pick-up one for the bridge pick-up. I have installed a Stereo jack and I would like to know if anyone knows how I could wire the bridge Pickup to the tip (Standard mono config) and wire the neck to the sleeve. I want the middle position to still be the combination of the two, I still want to maintain the seperate volume controls and I still want the tone switch (the other 3 way toggle) to still be the tone control. I know basic wiring but this one's got me stumped. Any help would be greatly appreciated
thanks
Mike
thanks
Mike
Comment