Need help to wire a left handed strat

[tepsamps]

Hi,
i "ve got a left handed strat to assemble, and i wired badly the 5 way switch. Because when on the neck PU position i've got the bridge PU output and that's all (also the bridge PU on the Neck+middle). The middle and neck PU are not connected. I wonder if i put the switch in the correct direction. Could some one help me?
The fact is i don't anderstand how a 5 way switch works...
Many thanks

[Dave H]

i"ve got a left handed strat to assemble, and i wired badly the 5 way switch. Because when on the neck PU position i've got the bridge PU output and that's all (also the bridge PU on the Neck+middle). The middle and neck PU are not connected. I wonder if i put the switch in the correct direction.

You just have a few wires swapped over. Compare your wiring to the diagram below.
It's an open switch. You can see how it works if you look carefully. In positions 1,3 and 5 the wiper connects to a single PU. In positions 2 and 4 the wiper connects two PUs together.

[big_teee]

Fender has all kinds of diagrams, both right and left handed.
If you want a vintage 62 wiring, you can get it here.
https://p4.zdassets.com/hc/theme_ass...0120B_SISD.pdf
All the rest of there strat diagrams are here.
https://support.fender.com/hc/en-us/...rvice-Diagrams
GL,
T

[tepsamps]

You just have a few wires swapped over. Compare your wiring to the diagram below.
It's an open switch. You can see how it works if you look carefully. In positions 1,3 and 5 the wiper connects to a single PU. In positions 2 and 4 the wiper connects two PUs together.

Many thanks, it works now. I still don't anderstand but it works. Great!