Help finding a pot

[Valvehead]

From reverb...

https://reverb.com/item/17784250-bou...pot-long-shaft

i saw that one today.....ill ask the owner if he wants to spend the $.......

i think i found one i can make work =

https://www.ebay.com/itm/R-VPSH-500K...MAAOSwIANd7CYH

[g1]

How about this: https://guitarelectronics.com/cts-50...g-brass-shaft/

[Valvehead]

How about this: https://guitarelectronics.com/cts-50...g-brass-shaft/

nope...need 16mm diameter body.....threaded part needs to be at least 3/4" or 15mm

[Bloomfield]

How about this: https://guitarelectronics.com/cts-50...g-brass-shaft/

Interesting site; I'd never seen it before. They do have this rather pricey item which ought to work. It is 5/8" square, which is about 16mm. https://guitarelectronics.com/bourns...ot-long-shaft/

[g1]

One thing that has not been mentioned is the diameter of the threaded portion.

[nevetslab]

I just checked with calipers to scale the photo of the pot, finding 10mm (on the scale) did closely measure as 10mm, and checking the pot shaft, looks like 1/4" shaft. Valvehead could confirm that.

[Valvehead]

I believe its 3/8 dia shaft ..like les paul. Anyway--I found one and the bass is done !!!

Ebay.... 500k or 250k , 16mm dia body , Long Shaft pot w/ push-push switch , I removed the switch section and epoxied the end of the shaft to prevent pulling out....then i bent the 3 pins 180 degrees and trimmed them to fit into a Pcb hole ,,,,,,it fits PERFECT !!!

https://www.ebay.com/itm/R-VPSH-500K...h/264559717637