paf baseplate with 50 mm spacing

[clown_luthier]

so guys is it possible to buy baseplate like this but with 50 mm spacing and only on 1 side holes for screw poles?

[Electricdaveyboy]

I had good results by drilling the 49,2 mm baseplate.

[David Schwab]

Is .08mm really going to make a difference? That's only .04mm on eeach side.

[Zhangliqun]

That looks like a Stewmac baseplate which I'm fairly certain is 50mm. If it's not a perfect fit, just ream the holes out slightly wider. As Dave says, 0.4mm on each side isn't that much on a baseplate.

It's much more an issue with covers because for aesthetic reasons you can't do any reaming but a slight widening of baseplate holes to accommodate 49.2mm and 50mm parts is no problem.

[Spence]

You can tap those holes.

[belwar]

You can tap those holes.

Thats what she said!

[clown_luthier]

Thats what she said!

Thanx guys, i was thinking to buy guitar jones White and aged white bobbins to be closer to paf in color than with cream color.
he have only 50 mm in that colors.

Thanx for help evryone