I recently put seth bridge in my PRS Mccarty and I reall like the difference between that and the "59 i had in there previously. However i do play at high volume and often with a lot of gain and feed back can be a bit of an issue. I use a Telefunken filled Egnater ie4 into a VHT 2/50/2 in to a Bogner 4x12 for my main live rig. The seth's have had the covers removed and have neoprene foam padding behind the pickup in the cavity to minimize vibration.
I was wondering if anyone has any experience or ever compared a stock Seth Lover to one that has been potted? A comparison of any similar PAF-ish pickup would be fine.
I am contemplating a quick dip in a parrafin/bees wax mix. Not a long soak 'til the bubbles go away, but just enough to coat the outer winds and NOT saturate the coils. I wonder if this might do the trick. The trick being loosing the feedback/saving the Mojo. I assume it is just a matter of where the winds are vibrating.?.
I was wondering if anyone has any experience or ever compared a stock Seth Lover to one that has been potted? A comparison of any similar PAF-ish pickup would be fine.
I am contemplating a quick dip in a parrafin/bees wax mix. Not a long soak 'til the bubbles go away, but just enough to coat the outer winds and NOT saturate the coils. I wonder if this might do the trick. The trick being loosing the feedback/saving the Mojo. I assume it is just a matter of where the winds are vibrating.?.
Comment