Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Gretsch Hilotron Pickup specs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Gretsch Hilotron Pickup specs

    Hi everyone,
    Anybody knows the specs of vintage Gretsch Hilotron single coil pickups?
    Like average resistance, Wire gauge, magnets(ceramic or alnico bar) number of turns Etc,?

    Thanks

  • #2
    Originally posted by Harrysong View Post
    Hi everyone,
    Anybody knows the specs of vintage Gretsch Hilotron single coil pickups?
    Like average resistance, Wire gauge, magnets(ceramic or alnico bar) number of turns Etc,?

    Thanks
    Just off the top of my head I can tell you that they are usually somewhere around half of a Filtertron as far as the DC resistance and turns. I believe they are also the same wire gauge as the Filtertron though I can't recall right now what that is. They are alnico magnets for sure. If you really need the info I can search and see what I have on them, but I'm sure some others know better than I do. They are weaker pickups that do the country and rockabilly thing really well.

    Greg

    Comment


    • #3
      I have some specs I've gathered from somewhere. I don't know how accurate they are. This might be for their new pickups.

      They list the Hi-lo Tron as 3200 tuns for the neck, and 3600 turns for the bridge. This same list has the Filtertron as 3600 turns for the standard and 3000 turns for the vintage. The wire is listed 44AWG.

      A vintage Hi-Lo Tron was probably 3000 turns, since it was half a Filtertron.
      Last edited by David Schwab; 05-15-2010, 04:59 PM. Reason: added info
      It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. — Albert Einstein


      http://coneyislandguitars.com
      www.soundcloud.com/davidravenmoon

      Comment


      • #4
        Here's the info I have on the Hi-Lo-Tron. I don't know if it is modern or vintage specs.

        Greg


        Hi-Lo Tron

        Magnet Wire (-) 3.5 x 18 (mm) Urethane 3UEW 0.05

        Neck : 3200T 3.4 - 3.6 KΩ

        Bridge : 3600T 3.9 - 4.1 KΩ

        0514-4V Alnico Magnet

        Single coil, alnico magnet, fairly low output, very sweet sounding.

        Comment


        • #5
          Originally posted by soundmasterg View Post
          Here's the info I have on the Hi-Lo-Tron. I don't know if it is modern or vintage specs.

          Greg


          Hi-Lo Tron

          Magnet Wire (-) 3.5 x 18 (mm) Urethane 3UEW 0.05

          Neck : 3200T 3.4 - 3.6 KΩ

          Bridge : 3600T 3.9 - 4.1 KΩ

          0514-4V Alnico Magnet

          Single coil, alnico magnet, fairly low output, very sweet sounding.
          I see we have the same spread sheet.
          It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. — Albert Einstein


          http://coneyislandguitars.com
          www.soundcloud.com/davidravenmoon

          Comment


          • #6
            Originally posted by David Schwab View Post
            I see we have the same spread sheet.
            Yeppers. I used to have some other specs around that TVJones had told me years ago, but I couldn't find it. That spread sheet is probably close enough though....

            Greg

            Comment


            • #7
              Thanks guys!.
              much appreciated

              Rock on.

              Comment


              • #8
                Originally posted by soundmasterg View Post
                Yeppers. I used to have some other specs around that TVJones had told me years ago, but I couldn't find it. That spread sheet is probably close enough though....
                I have a few big rolls of 44. I'm going to have to try and wind me some Filtertronesque pickups.
                It would be possible to describe everything scientifically, but it would make no sense; it would be without meaning, as if you described a Beethoven symphony as a variation of wave pressure. — Albert Einstein


                http://coneyislandguitars.com
                www.soundcloud.com/davidravenmoon

                Comment

                Working...
                X