Pickup Gaussmeter v.3.0

[BadHorsie]

Thanks -Elepro-. I guess I was on the heading down the right track already.

[BadHorsie]

-Elepro- is the PDF that you posted early to serve as the schematic or do you have one with more detail that shows the orientation of the components to be attached to the PCB. This is my first electronic project of this caliber and I am a little unsure of the orientation of some of the components Diode rectifer . or can you provide a macro picture of the board with components attached. HELP!!!

[-Elepro-]

pcb silk screen show right orientation of all components....
let me know if you have trouble...

bye

[copperheadroads]

thanks guys & BadHorsie ..... i was wondering if mouser had a sensor for this project or do i have to look on ebay . that one on ebay has ended probably not a problem finding another somewhere

[BadHorsie]

My bad, looks like the sensors are not included in the mouser work sheet and will need to be sourced from some where else.

[copperheadroads]

i was going to try these ,are these the correct sensors
10 pcs A1302 Ratiometer Hall Effect Sensors - eBay (item 350361904577 end time Jul-02-10 01:30:13 PDT)
same number but just making sure ...i know im a pain in the ass

[BadHorsie]

A1302 If this is the correct part number (A1302KUA-T) digikey has them for 1.37 but they will not ship until 7-28-12. The same for the AD22151 if this is the correct part number is (AD22151YRZ) they are also at digikey for 5.40 and will ship now.

[BadHorsie]

i was going to try these ,are these the correct sensors
10 pcs A1302 Ratiometer Hall Effect Sensors - eBay (item 350361904577 end time Jul-02-10 01:30:13 PDT)
same number but just making sure ...i know im a pain in the ass

That is a good deal if it is the right sensor. you would be able to sell what you don't use to recoupe some of your outlay. Edit: that appears to be the same sensor that David King referenced in post 4. It has the same specs.

[copperheadroads]

i think im gonna give her a shot

[-Elepro-]

a1302 in ebay link are the right sensor..... and the ad22151xxx of digikey too
....instead the a1302kua-t of digikey has wrong package

bye

[BadHorsie]

Thanks -Elepro- I just ordered the eBay A1302 and the AD22151YRZ from Digikey (already had an account at Digikey).

[copperheadroads]

thanks guys & -Elepro- i ordered the ebay a1302 from evilbay

[BadHorsie]

@ copperheadroads did you already order your AD22151?

[copperheadroads]

no................ im gonna order A1302 from ebay

[BillScheltema]

Wow, it seems as though I should be checking my PO box today.
I already have an A1302 so I just ned to get the rest of the mouser stuff.
Should be fun.

Bill