Originally posted by Untitled_Project
View Post
5166 turns of 43 AWG on screw coil
5712 turns of 44 AWG on stud coil
That was a little under, but you get the idea. If you get the real pickup you will find that they are not trying to have each coil the same resistance, but instead as the patent says:
"The coils have substantially the same number of turns of electrically conducting wire wound thereon, and the wires constituting the coils are of different gauges."
So the total is not split between them, but is the sun of two different numbers.
At the very least experiment and you might discover something you like.
Now the other patent used in that pickup places slugs that you don't see between the screws that you do see to raise the inductance. So unless you just like that look, you might be better off using two blade bobbins, since that's more or less what they did.
Comment