4 way switch 2 humbuckers dilema

[the great waldo]

Hi All
I was just wondering if anyone has got the following to work and if so circuit diagram please.
2 humbuckers + 4 way switch + 1 pushpull for both humbucker coil taps. So far managed to get all positions working except for 2 single cols serial 4th position only neck pup coil on. In all other positions everything works fine including 4th pos Humbucking. Any help gratefully accepted.

Cheers
Andrew

[Mike Sulzer]

Hi All
I was just wondering if anyone has got the following to work and if so circuit diagram please.
2 humbuckers + 4 way switch + 1 pushpull for both humbucker coil taps. So far managed to get all positions working except for 2 single cols serial 4th position only neck pup coil on. In all other positions everything works fine including 4th pos Humbucking. Any help gratefully accepted.

Cheers
Andrew

OK, I am curious. Did you make a table showing what the four switch positions do?

[The Dude]

It might help to upload a diagram or schematic of what you have so far.

[the great waldo]

It might help to upload a diagram or schematic of what you have so far.

Well I got a reply from the pup makers and they were kind enough to send me a working schematic. Cheers Andrew

[copperheadroads]

Interesting !!! .I've never understood the pinout & possibilities of a 4 way , if you can share a crude drawing i can make a decent wiring diagram if you like .

[the great waldo]

Interesting !!! .I've never understood the pinout & possibilities of a 4 way , if you can share a crude drawing i can make a decent wiring diagram if you like .

Here's another go at posting the photo